About nizimane

nizima Manager for FaceRig “nizimane” is an app that allows you to “register, save, and edit” the settings necessary for using Live2D models in exported data format with FaceRig.

App developer: Live2D Inc.

  • Windows版のみの提供となります。
  • 現在にじマネは、FaceRigへの設定にのみ対応しておりますが、そのほかのアプリケーションについても対応していく可能性がありますのでご期待ください。

Installation

1. Run the downloaded Setup.exe to launch the installer.

2. Follow the prompts and press “Next”.

3. Specify the installation folder and click “Next”.

4. Press [Next].

5. After carefully reading the license agreement, select “I agree to the license agreement”. and click “Next”.

6. Press [Next].

7. Click “Install”.

8. The installation will start, so please wait as it is.

9. Click [Finish].

  • 既に nizima Manager for FaceRig がインストールされている場合、自動でアンインストーラが起動するので、ダイアログに沿ってアンインストールしていただきます。

Startup

From the “Start Menu”, click on the icon with the name you specified during installation. If you cannot find the shortcut, execute “nizima_Manager_for_FaceRig.exe” in the “installation folder”.

  • 起動時に「VCRUNTIME140_1.dllが見つからないため、コードの実行を続行できません。」というエラーが表示された場合はこちらから「Visual Studio 2015、2017、および 2019 用 Visual C++ 再頒布可能パッケージ」をダウンロードし、インストールすると解決する可能性があります。

Startup screen

Screen Layout

nizimane consists of four areas.

Area NameDescription.
toolbar– Displays app icon, app name, and app version information.
– Minimize, maximize, and close (exit apps) windows.
– The window can be moved by dragging and dropping the toolbar.
Note: Window size cannot be changed.
menu barPlease check the menu bar.
Select various settingsClicking on the title will display the corresponding settings.
Various settingsPlease check various settings.

menu bar

File

menu item nameDescription.
Open ModelOpen the Live2D model you want to use in FaceRig.
shortcut key [Ctrl]+[O]
Model StorageSave the Live2D model being set to the FaceRig folder set in the model selection screen.
shortcut key [Ctrl]+[R]
saveSave the Live2D model being set to specified folder set in the model selection screen.
shortcut key [Ctrl]+[S]
Launch FaceRig.Launch FaceRig.
shortcut key [Ctrl]+[F]
Open the strage location of Live2D Models for FaceRig.Open the Live2D model storage location for FaceRig that is set in the model selection screen.
shortcut key [Ctrl]+[D]
ExitExit the app.
shortcut key [Ctrl]+[Q]
  • モーションやパラメータの設定が不要な場合(cfgファイルが既にある等)、model3.jsonを読み込んで、 モデル登録(Ctrl+R)、FaceRig起動(Ctrl+F) で、すぐにFaceRigでアバター体験を楽しめます。

Help

menu item nameDescription.
manualThis page will open.
nizima websitenizima will open.
Live2D websiteThe Live2D Inc. website will open.
versionDisplay version information.
Clicking outside the screen closes the modal window.

Various settings

In 4 Steps, Setup and and storage location your Live2D model for FaceRig.

step 1. Select Model

Select the Live2D model you would like to use with FaceRig. check the model formats available for FaceRig and select the Live2D model you would like to use.

1. If the standard FaceRig installation folder is found, the FaceRig folder will be set by default.

2. If you cannot find the standard installation folder of FaceRig, press [FaceRigフォルダ登録] to specify the folder where FaceRig is installed.

3. Select the model you wish to load.

Drag and drop the “*.model3.json” file of the model you wish to load onto the area enclosed by the dotted line.

Alternatively, click in the area to display the file selection screen.

If you want to re-set a previously set model, click on “Load Previous Model”.

4. When the model selection check box turns green, loading is complete.

If motion is already registered in the Live2D model, the “Motion Setup” checkbox will automatically be green as well.

  • クリッピングマスクに関する警告のあるモデル、model3.jsonに誤ったパスが登録されているモデルなどを読み込むと動作が停止することを確認しています。動作が停止した場合には、モデルの書き出しやフォルダ構成に不備が無いかご確認ください。

5. Click “Next” to move to the motion setting screen.

step 2. Motion setting

1. The model loaded in step 1 is displayed.

  • モデルビュー上にて、ホイール上下でモデルの拡縮・ホイール押し込み&ドラッグでモデルの移動ができます。
  • 現在、Live2Dモデルファイル内にFaceRig設定用の「cfgファイル」が存在していても反映されません。
  • Live2Dのモデル設定でモーションが登録されていて、モーションファイルへのパスが正しい場合、モーションファイル名の一覧が表示されます。また、インデックス順に自動でキーを割り振ります。
  • 「motions」という名前のフォルダに格納されたモーションファイルは、モデル登録時に自動でコピーされます。既存のcfgファイルを使用したい場合は、motionsフォルダにモーションファイルが格納されているかご確認ください。

2. To play the currently loaded motion, hover the mouse over the motion name.

3. Associate a motion to each key (Q, W, E, R, T, Y).

Key Binding

1. select the key you wish to register that is located in the “Motion Shortcut bindings” section.

2. Select the name of the motion you wish to register, which is located in the “Operations Controlled by Shortcuts” section.

Confirmation of key operation

Enter the key that you have set the bind setting for on the keyboard. Alternatively, select that key from the [Shortcut Keys] listed in the lower left corner of the screen.

4. Motion can be added to the Live2D model that has not been preset.

Drag and drop the motion “*.motion3.json” file you wish to load into the area enclosed by the dotted line.

  • モーションはLive2Dモデルにより設定値などが異なります。設定中のLive2Dモデル専用のモーションをご利用ください。

step 3. Parameter Setting

1. The model loaded in step 1 is displayed.

The [Parameter controlled by shortcut] can be switched between ID display and Name display.

  • Live2Dモデルに設定されているパラメータが表示されます。パラメータを追加・変更・削除したい場合はモデルを改修する必要がございます。モデル制作者様にお問い合わせください。
  • にじマネ上でパラメータ用キーの登録を行わず、以下のパラメータがLive2Dモデルに存在する場合は、FaceRigのデフォルトで以下のように割り振られます。

    Z: ParamCheek
    X: ParamTear
    C: ParamRage
    V: ParamHairFluffy

2. Bind a parameter to each key ( Z, X, C, V, Shift+Z, Shift+X, Shift+C, Shift+V ).

Key Binding

1. select the key you wish to bind that is located under “Parameter Shortcut Bindings”.

2. select the parameter ID (or name) you wish to register, located under “Operations Controlled by Shortcuts”.

3. In [Parameter ON/OFF Value], enter the ON/OFF value for the currently selected parameter respectively. The valid range is set for each parameter, so make settings within the displayed range.

Confirmation of key operation

Enter the key that you have set the bind setting for on the keyboard. Alternatively, select that key from the [Shortcut Keys] listed in the lower left corner of the screen.

step 4. More Information

You can optionally set the default positioning of the model, icons, etc.

  • Ver1.1.0で追加された項目です。項目が表示されていない場合は、最新版をダウンロード してアップデートしてください。

1. set the default position and scale of the model.

The default position and scale of the model can be set in two ways.

Screen used to set the default position and scale of the model

preview screen

You can set the position and scale of the model by mouse operation.

full screen

Clicking the button shifts the model’s default position setting to full screen mode, and pressing the button in the upper right corner returns the model to its current screen size.

grid button

A grid appears on the preview screen.

a. Set by entering numerical values

-+
XMove leftMove right
YMove downMove up
ZScale upScale down

b. Visual setup with mouse

The default position can be set visually by using the mouse to manipulate the model displayed on the preview screen.

mouse operationbehavior
middle mouse button
+ drag
Up, down, left, right move
scrollScale up and down
Mouse left and right buttons simultaneously
+ drag
Scale up and down

2. Set up model information.

Sets model information to be displayed in the FaceRig avatar gallery.

1. Set the model name.

By default, the model file name is entered.

2. Set the model icon.

  • 事前にアイコンに使用する画像をご用意ください。

    ・拡張子「PNG」
    ・正方形サイズ

1. drop or click on the image within the pink border to select it.

2. The set image will be displayed within the border.

Note: It is possible to reset the settings by repeating the same process even if they have already been set.

3. set the model description.

You can set the description to be displayed by FaceRig. Line breaks are automatically replaced by .

  • 特殊記号(’や<)はそのままcfgに出力されますが、FaceRig上で表示されない可能性があります。

step 5. Register models to FaceRig

1. press Register models to FaceRig

Note: This is the same function as [storage the model (Ctrl+R)] in the File menu.

If the Live2D model was successfully loaded in step 1, the model can be registered to FaceRig at any time.

2. If a valid FaceRig “cfg file” exists in the Live2D model being set up, a selection message will appear asking whether to use the existing “cfg file” or create a new “cfg file” based on the settings made in nizimane

Yes: Outputs the settings made by nizimane to a “cfg file” for use.
No: Duplicate the “cfg file” included in the Live2D model and use it.

3. The destination for strage location the model for FaceRig will open.

  • フォルダ名はモデル選択時に選択した「*.model3.json」の「*」に該当する文字列で作成されます。
    上記の画像の場合、「haru.model3.json」の「haru」でフォルダが作成されます。
    また、FaceRig用の設定は、ファイル名「cc_haru.cfg」となります。

Check the display of the model with FaceRig

1. Press [FaceRig起動(Ctrl+F)] in the File menu.

  • ここからはFaceRigの画面となりますので、キャプチャ画像と画面が異なる場合がございます。予めご了承ください。

The steam update may run, or the login screen to steam may appear. Please follow the instructions on the actual screen.

2. When FaceRig starts up, press “LAUNCH”.

3. LAUNCH will open.

4. Change to “Advanced UI”.

5. Open “Avatar”.

6. check if the model you have just set up is displayed in the “Workshop and Custom Avatars” section.

  • 一覧に表示されるアイコンは、「*.model3.json」の「*」に該当する文字列を元に読み込まれます。
    「haru.model3.json」の場合、「ico_haru.png」という静止画ファイルが存在する場合、FaceRig一覧のアイコン画像として表示されます。存在しない場合は「?」というアイコンになります。
  • モデル名がCommonファイルと同じものの場合、FaceRigの一覧に正常に表示されない場合がございます。
    <FaceRigのフォルダ>\Mod\VP\PC_Common\Objects 内のフォルダ名と同じフォルダ名にならないようにご注意ください。

Download

Download it now and set up your Live2D model in FaceRig!

If you don’t have a FaceRig compatible Live2D model at hand, try nizima to find one you like!